Versilon™ C-544-A IB
Flexibility at high pressure & fuel and oil resistance
Multi-purpose, abrasion resistant tubing
Specially formulated Versilon™ C-544-A IB tubing is ideal for use in some of the most physically demanding applications. When exposed to abrasive conditions, the excellent wear properties of Versilon™ C-544-A IB tubing frequently outperforms traditional rubber, plastic and metal materials. More flexible than many other reinforced tubing, Versilon™ C- 544-A IB can often be used in applications requiring a tight bend radius where other tubes have collapsed and failed. Versilon™ C-544-A IB tubing also retains much of its unique flexibility even at temperatures as low as -73°C (-100°F). Versilon™ C-544-A IB tubing meets FDA 21 CFR, 177.1680 and 177.2600 criteria for food contact applications.
Excellent stability
While many rubber and plastic materials exhibit resistance to certain solvents, oils, and chemicals, Versilon™ C-544-A IB tubing will resist a much wider range of substances. Plasticizer extraction leading to embrittlement is one of the most frequent causes of failure when flexible tubing is exposed to harsh chemicals. Versilon™ C-544-A IB tubing is plasticizer-free and remains flexible even when cycled through temperature extremes.
Large bore stock sizes ideal for bulk transfer
Reinforced for elevated pressure, Versilon™ C-544-A IB tubing can easily handle applications requiring large volume transfer of high viscosity fluids, pastes, and slurries. It is conveniently available from inventory in a wide variety of common sizes up to 2” inner diameter.
Regulatory compliance
• Meets FDA criteria for food contact
• FDA 21 CFR, 177.1680 and 177.2600
• Meets NSF 61 criteria for potable water contact*
• FDA 21 CFR, 177.1680 and 177.2600
• Meets NSF 61 criteria for potable water contact*
Versilon™ Tube C-544-A IB - Diameters and wall thickness
| Art.No. | Ø Inner | Ø Outer | Wall | Inch rounded | Crossref. |
|---|---|---|---|---|---|
| VS3,18CA9,53IB | 3,18 mm (1/8") | 9,53 mm (3/8") | 3,18 mm (1/8") | 3,2 x 9,6 x 3,2 mm | AZY02008 |
| VS4,76CA11,11IB | 4,76 mm (3/16") | 11,11 mm (7/16") | 3,18 mm (1/8") | ||
| VS6,35CA12,7IB | 6,35 mm (1/4") | 12,7 mm (1/2") | 3,18 mm (1/8") | 6,4 x 12,7 x 3,2 mm | AZY02019 |
| VS9,53CA15,88IB | 9,53 mm (3/8") | 15,88 mm (5/8") | 3,18 mm (1/8") | 9,6 x 15,9 x 3,2 mm | AZY02029 |
| VS12,7CA19,05IB | 12,7 mm (1/2") | 19,05 mm (3/4") | 3,18 mm (1/8") | 12,7 x 19,1 x 3,2 mm | AZY02038 |
| VS15,88CA22,23IB | 15,88 mm (5/8") | 22,23 mm (7/8") | 3,18 mm (1/8") | 15,9 x 22,3 x 3,2 mm | AZY02046 |
| VS19,05CA26,99IB | 19,05 mm (3/4") | 26,99 mm (1-1/16") | 3,97 mm (5/32") | 19,0 x 27,0 x 4,0 mm | AZY02054 |
| VS25,4CA34,93IB | 25,4 mm (1") | 34,93 (1-3/8") | 4,76 mm (3/16") | 25,5 x 35,1 x 4,8 mm | AZY02064 |
| VS31,75CA44,45IB | 31,75 mm (1-1/4") | 44,45 mm (1-3/4") | 6,35 mm (1/4") | 31,8 x 44,6 x 6,4 mm | AZY00071 |
| VS38,1CA50,8IB | 38,1 mm (1-1/2") | 50,8 mm (2") | 6,35 mm (1/4") | 38,1 x 50,9 x 6,4 mm | AZY00074 |
| VS50,8CA63,5IB | 50,8 mm (2") | 63,5 mm (2-1/2") | 6,35 mm (1/4") | 50,8 x 63,6 x 6,4 mm | AZY00078 |
Typical Physical Properties of Versilon C-544-A IB Tubing
| Property | ASTM Method | Value of Rating |
|---|---|---|
| Durometer Hardness | D2240 | 85° Shore A, 15s |
| Color | - | clear |
| Specific Gravity | D792 | 1.12 |
| Tensile Strength | D412 | 34,5 MPa (5.000 psi) |
| Ultimate Elongation | D412 | 400,00% |
| Tear Resistance | D1004 | 61,3 kN/m (350 lb-f/in) |
| Compression Set Constant Deflection @ 70°C (158°F) for 22 hrs | D395 | Method B 19,00% |
| Dielectric Strength | D149 | 21,6 kV/mm (550 v/mil) |
| Tensile Stress @100% Elongation | D412 | 5,5 MPa (800 psi) |
| Tensile Stress @300% Elongation | D412 | 8,3 MPa (1.200 psi) |
| Maximum Recommended Operating Temperature | - | 82° C (180°F) |
| Tensile Set | D412 | 45,00% |
| Brittleness Temperature | D746 | -73°C (-100°F) |
| Water Absorption, 24 hrs. @ 23°C | D570 | 1,80% |