Versilon™ SE-200
Versilon™ SE-200 - Phthalate-free Chemical Inert Transfer Tubing
Sustainable Flexible Tubing without phthalate
Versilon™ SE-200 is now phthalate-free. We are proud to be among the first companies to offer sustainable flexible tubing products. Versilon™ SE-200 combines the high performance standards customers demand with an eco-friendly tubing design.
Excellent Chemical Resistance
Offering flexibility, glass-like clarity and outstanding bend radius, Versilon™ SE-200 can handle many applications where flexible tubing of the past could not be used. Its FEP inner liner provides the ultimate in chemical resistance and can accommodate a wide variety of fluids, from corrosives to MEK-based solvents. The inert liner limits the potential of fluid contamination during transfer. Versilon™ SE-200 will not impart odor or taste, making it well-suited for food and beverage use.
Meets FDA Criteria for Food Contact
Non-toxic, taste-free and odor-free, Versilon™ SE-200 meets FDA 21 CFR Part 177.1550 criteria for contact with food products.
Features and benefits
- Crystal clarity
- Improved flexibility when compared to rigid fluoropolymer tubing
- Chemically resistant and inert
- Non-contaminating fluid path
- Meets FDA 21 CFR Part 177.1550 criteria for food contact
- Contains no BPA or phthalates
Typical applications
- Chemical processing
- Paint and solvent production and packaging
- Adhesive transfer lines
- Semiconductor processing
- Photographic processing equipment
- Beverage dispensing
- Ink and toner feed lines
- Fertilizer and pesticide distribution
Versilon™ Tube SE-200 - Diameters and wall thickness
| Art.No. | Ø Inner | Ø Outer | Wall | Inch rounded | Crossref. |
|---|---|---|---|---|---|
| TY1,59SE3,18 | 1,59 mm (1/16") | 3,18 mm (1/8") | 0,79 mm (1/32") | 1,6 x 3,2 x 0,8 mm | AJD00002 |
| TY3,18SE6,35 | 3,18 mm (1/8") | 6,35 mm (1/4") | 1,59 mm (1/16") | 3,2 x 6,4 x 1,6 mm | AJD00007 |
| TY4,76SE7,94 | 4,76 mm (3/16") | 7,94 mm (5/16") | 1,59 mm (1/16") | 4,8 x 8,0 x 1,6 mm | AJD00012 |
| TY6,35SE9,53 | 6,35 mm (1/4") | 9,53 mm (3/8") | 1,59 mm (1/16") | 6,4 x 9,6 x 1,6 mm | AJD00017 |
| TY9,53SE14,29 | 9,53 mm (3/8") | 14,29 mm (9/16") | 2,38 mm (3/32") | 9,6 x 14,3 x 2,4 mm | AJD00028 |
| TY12,7SE19,05 | 12,7 mm (1/2") | 19,05 mm (3/4") | 3,18 mm (1/8") | 12,7 x 19,0 x 3,2 mm | AJD00038 |
| TY19,05SE25,4 | 19,05 mm (3/4") | 25,4 mm (1") | 3,18 mm (1/8") | 19,0 x 25,4 x 3,2 mm | AJD00053 |
Typical Physical Properties of Versilon SE-200
| Property | ASTM Method | Value of Rating |
|---|---|---|
| Durometer Hardness | D2240 | 66° Shore A, 15s |
| Color | - | Clear |
| Opacity | - | Translucent |
| Tensile Strength | D412 | 15,2 MPa (2200 psi) |
| Tear Resistance | D1004 | 43,8 kN/m (250 lb-ft/inch) |
| Ultimate Elongation | D412 | 390,00% |
| Specific Gravity | D792 | 1,21 |
| Water Absorption 23°C for 24 hours | D570 | <0,01 % |
| Compression Set Constant Deflection 70° C for 22 hours | D395 | Method B 59,00% |
| Max. Recommended Operating Temp. | - | +74° C |
| Brittleness by Impact Temperature | D746 | -36° C |
| Tensile Stress @200% Elongation | D412 | 9,5 MPa (1378 psi) |
| Tensile Set | D412 | 57,00% |
Unless otherwise noted, all tests were conducted at room temperature (73°F). Values shown were determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.
Fittings for Versilon™ SE-200
Single barb insert fitting is recommended for use with Versilon™ SE-200 tubing.Single barb insert fittings have a land behind the barb that allows a clamp to be fastened over the tubing (see picture below). Note: please be sure not to over-tighten the clamp as it might result in damage to the tubing.
To facilitate entry of the fitting into the tubing, the outside diameter at the end of the tapered fitting must be smaller than the inside diameter.
