Tygon® LP-1500
EPA and CARB certified tubing for low permeation emission
Designed for Gasoline-Powered, Handheld Equipment
Specially designed to meet new government regulatory standards to reduce the harmful health effects of ozone and carbon monoxide, Tygon® LP-1500 tubing low permeation fuel tubing is an environmentally responsible tubing for fuel line applications in small engines and lawn & garden equipment (lawn mowers, snow blowers, chain saws, line trimmers, gas leaf blowers, etc.).
The tubing’s robust, multi-layer design features barriers to minimize permeation, with a chemical and fuel resistant inner layer and a UV resistant outer jacket to prevent premature aging. Offering superior clarity and flexibility, Tygon LP-1500 tubing provides easy observation of fuel flow and is ideal for hand-held outdoor power equipment.
The tubing’s robust, multi-layer design features barriers to minimize permeation, with a chemical and fuel resistant inner layer and a UV resistant outer jacket to prevent premature aging. Offering superior clarity and flexibility, Tygon LP-1500 tubing provides easy observation of fuel flow and is ideal for hand-held outdoor power equipment.
Regulatory Compliance
Tygon® LP-1500 tubing is EPA and CARB certified to meet permeation emission standards of 15g/m2/day.
Features and Benefits
- chemical and fuel resistant inner layer
- UV resistant outer jacket to prevent premature aging
- wide temperature range from -40 F to 185 F (-40 C to 85 C)
- high abrasion, cut and tear resistant for longer service life
- highly flexible and kink resistant
- tight tolerances for better fitting retention and better seal
- compatible with E-10 ethanol blend fuel
Typical Applications
- Hand-held power equipment
- Small utility equipment
- Fluid power motors
- other small engine fuel lines
Tygon® Tube LP-1500 - Diameters and wall thickness
| Art.No. | Ø Inner | Ø Outer | Wall | Inch rounded | Crossref. |
|---|---|---|---|---|---|
| TY2,38HE4,76 | 2,38 mm (3/32") | 4,76 mm (3/16") | 1,19 mm (3/64") | 2,4 x 4,8 x 1,2 mm | AY700165 |
| TY3,18HE6,35 | 3,18 mm (1/8") | 6,35 mm (1/4") | 1,59 mm (1/16") | 3,2 x 6,4 x 1,6 mm | AY700007 |
| TY6,35HE9,53 | 6,35 mm (1/4") | 9,53 mm (3/8") | 1,59 mm (1/16") | 6,4 x 9,6 x 1,6 mm | AY700017 |
| TY12,7HE19,05 | 12,7 mm (1/2") | 19,05 mm (3/4") | 3,18 mm (1/8") | 12,7 x 19,1 x 3,2 mm | AY700038 |
Typical Physical Properties of Tygon® LP-1500 Tubing
| Property | ASTM Method | Value of Rating |
|---|---|---|
| Durometer Hardness | D2240 | 85° Shore A, 15s |
| Color | - | natur |
| Tensile Strength | D412 | 34.5 MPa (5,000 psi) |
| Ultimate Elongation | D412 | 400,00% |
| Tear Resistance | D1004 | 98.0 kN/m (560 lb-f/in |
| Specific Gravity | D792 | 1,18 |
| Compression Set Constant Deflection @ 70°C (158°F) for 22 hrs. | D395 Method B | 35,00% |
| Tensile Stress @ 100% Elongation | D412 | 6.9 MPa (1,000 psi) |
| Tensile Set @ 75% Elongation | D412 | 35 |
| Maximum Service Recommended Operating Temperature | - | 85°C (185°F) |
| Low Temperature Flexibility | D380 | -40°C (-40°F) |
| Water Absorption, % 24 hrs. @ 23°C | D570 | 0.90 |
Unless otherwise noted, all tests were conducted at room temperature 23°C (73°F). Values shown were determined on 1.905 mm (0,075") thick extruded strip or 1.905 mm (0,075") thick molded ASTM plaques or molded ASTM durometer buttons.
Regulatory Compliance
| 40 CFR 1060 EPA Regulation | Conforms |
| CA SORE Chapter 15, Article I | Conforms |
| CA Component Executive Order Number | Q-19-114 |
| CA Component Executive Order Size Limitations | 3/32" ID and above |
| EPA Certification Number | 5GN-ENAPNR-OA-04 |
| EPA Certification Size Limitations | 2/25" ID and above |
| ANSI B175.2 Annex D | Conforms |
Product Characteristics
| Opacity | Flammability Rating | Fuel Permeation (total tube), g/m2/d | |
|---|---|---|---|
| Translucent | UL94 HB | CA Phase II, 40°C CE 10, 40°C | <15 <15 |