Tygon® 2375 IB
Tygon® 2375 IB - Soft, Clear, Pressure and Chemical Resistant
HIGH-PRESSURE CHEMICAL TRANSFER APPLICATION
In the world of chemical Transfer, chemical Compatibility and Flexibility are the two most important performances criteria to ensure optimization of the performance.
Chemical Resistant to minimize Fluid Alteration and Loss
Tygon® 2375 IB Tubing which is unaffected by most chemical sanitizers and cleaners, is specially engineered to deliver just that outstanding performance in an environment where harsh chemicals are used. Because of its robust polyester braid reinforcement construction, Tygon® 2375 IB holds a full vacuum rating, ideal for suction/delivery side of any chemical transfer.
Flexibility without the use of Plasticizers
Until now, clear and flexible tubing was restricted from use in many applications due to the concern of plasticizer extraction. Tygon® 2375 IB is not manufactured with any plasticizers. This unique Tubing uses the latest in polymer technology to provide a clear (between braid) and flexible tubing choice fir sensitive fluid transfer applications.
Regulatory Compliance
- REACH
- RoHS
- RoHS
Features and benefits
- Outstanding Chemical Resistance
- Non-DeHP
- Plasticizer-Free – extends Tubing Life and reduces maintenance costs over plasticized products
- Safer disposal – releases no harmful and corrosive hydrogen chloride gas
- Smooth Inner Surface - provides better flow and inhibits particulate buildup
- Braid reinforcement for elevated working pressures
- Clear Tubing for better observation
Typical applications
- Detergent transfer for laundry
- Dishwashing and Warewashing cleaning chemical transfer lines
- Car washing equipment chemical transfer lines
- Harsh chemical transfer
- Solvent transfer
Tygon® Tube 2375 IB - Diameters and wall thickness
Art.No. | Ø Inner | Ø Outer | Wall |
---|---|---|---|
TY6,0UR12,0 | 6,0 mm | 12,0 mm | 3,0 mm |
TY10,0UR16,0 | 10,0 mm | 16,0 mm | 3,0 mm |
TY12,0UR18,0 | 12,0 mm | 18,0 mm | 3,0 mm |
TY16,0UR22,0 | 16,0 mm | 22,0 mm | 3,0 mm |
TY25,4UR34,93 | 25,4 mm (1") | 34,93 (1-3/8") | 4,76 mm (3/16") |
Typical Physical Properties of Tygon® 2375 IB
Property | ASTM Method | Value of Rating |
---|---|---|
Durometer Hardness | D2240 | 77° Shore A, 15s |
Color | - | clear |
Tear Resistance | D1004 | 42 kN/m |
Specific Gravity | D792 | 0.88 |
Water Absorbtion 23°C for 24 hours | D570 | 0,04% |
Compression Set Constant Deflection 70° C for 22 hours | D395 | Method B 100,00% |
Max. Recommended Operating Temp. | - | 54° C |
Low Temp Flexibility | D380 | -75° C |
Unless otherwise noted, all tests were conducted at room temperature 73°F (23°C). Values shown were determined on 0.075" (1.905 mm) thick extruded strip or 0.075" (1.905 mm) thick molded ASTM plaques or molded ASTM durometer buttons.
The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing's ability to withstand pressure, including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.
The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing's ability to withstand pressure, including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.